Proper Use And Operation - SELFSAT Snipe Manual De Usuario

1-2. Proper use and operation

This product has been designed for use in a portable use and fixed installation on vehicles
with maximum speeds of 130 km/h. It is designed to automatically aim an antenna at
geostationary television satellites transmitting directly to Europe.
The power to the system is supplied by a standard vehicle electric system with a rated
voltage of 12 or 24 Volts. For installations where a mains connection to the vehicle's electri-
cal system is provided, a suitable 230-Volt to 12-Volt power converter must be used.
Use of the equipment for any other purpose than the one specified is not permitted.
Please also note the following instructions from the manufacturer :
• It is not permitted to change the overall device by removing or adding individual components.
• The use of any other components than those originally installed is not permissible.
• Installation must only be performed by sufficiently qualified personnel. All instructions in the supplied Installation
Instructions, which form part of the Operating Instructions, must be carefully followed.
• The product does not require any regular maintenance. Housings and enclosures must not be opened. Checks
and maintenance work should always be carried out a qualified specialist.
• For car mounting system, all of the relevant and approved guidelines of the automotive industry must be
observed and complied with.
• The equipment must only be installed/operated on hard vehicle roofs/ground which are sufficiently strong and
inherently stable.
• Avoid to clean your vehicle with the mounted satellite system in a single-bay or drive-through car wash or with a
high-pressure cleaner..
3