Cleaning Maintenance And Storage - ALFA Domo Manual De Uso

CLEANING MAINTENANCE AND STORAGE

- Switch off the gas fired oven and wait it to cool down before cleaning.
- To clean the oven don't use traditional oven detergents,abrasive detergents, (kitchen detergents) or detergents
containing citrus extracts, nor use abrasive steel woll.
- The gas burner must be cleaned periodically, and remove any food residue.
- Make sure to not damage the valves and the burners during cleaning.
Thermometer - Clean with warm water, soap and a soft cloth.
Oven - Remove any residual food from the burner with a brush. Do not enlarge burner orifices.
Stainless steel surfaces - Wash with a soft cloth and soapy water. Pay attention to follow the grain of the stainless
steel. Do not use detersives with acids, turpentine or xylene. Rinse well after cleaning. Making the steel shine is
very easy. Just wash it with soapy water, rinse out with water and dry properly. In case of resistant residuals, you
can use a non-metal brush.
HOW TO MAINTAIN UNALTERED THE STAINLESS STEEL
Making the steel shine is very easy. Just wash it with water and soap, rinse out with water and dry properly. In
case of resistant residuals, it is possible use a non metal brush.
COLD SEASON
EN
We suggest to store the oven during the cold season in an enclosed dry area to protect it from weathering. Before
storage, lightly lubricate the metal parts with Vaseline oil in order to avoid corrosion. After storage, please check
for any malfunction.
WHERE TO KEEP THE OVEN
- If the gas fired oven is not used please close the gas cylinder feeding valve.
- If the gas fired oven is stored in an enclosed area, please disconnect the gas feeding. The gas cylinder must be
placed outside in a well aired area.
- If the gas cylinder is not disconnected from the oven, please put them outside in a well aired area.
- The gas cylinder must be placed outside in a well aired place and must be kept away from the children reach.
The unused cylinders must NOT be stored in buildings, garages or other enclosed places.
GAS BURNER DISASSEMBLY AND CLEANING
The gas burner should be cleaned periodically by carefully sucking up any cooking residues.
When cleaning valves and burners, be careful not to damage the burner.
Before cleaning is necessary to remove the burner from the oven by running the following procedure:
1. Remove the knob (a).
2. Unscrew the 4 screws (b).
3. Remove the gas box
4. Disconnect the cable piezoelectric ignition.
To replace the burner just perform the procedure in reverse.
1
18
(c) to discover the connection of the cable piezoelectric ignition.
2
1
3
4
1
2
2
3
4
4
3