Installation Requirements - Wolf DD30 Manual Del Usuario

SPE C IF I CAT I ON S

Installation Requirements

For installation with a Wolf cooktop, a minimum 25
deep flat countertop is required.
For installation with a sealed burner rangetop or 30"
or 36" contemporary cooktop, an accessory trim kit is
(914)
required and available through an authorized Wolf dealer.
For local dealer information, visit the find a showroom sec-
tion of our website, wolfappliance.com.
The remote-mounted control module can be positioned
horizontally or vertically. It must be located within 9'
of the downdraft assembly and a minimum 3"
edge of the cooktop cutout.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
B L O WE R S
CAUTION
For use with a Wolf 600 CFM internal blower and
remote blowers rated maximum 3 amps.
Internal, in-line, and remote blowers are available through an
authorized Wolf dealer.
Internal blowers have a 6"
(152)
front or rear mounted, and can be discharged in any direc-
tion by rotating the blower box. In-line and remote blowers
have a 10" discharge and can be discharged from the
(254)
front or rear.
4 | Wolf Customer Care 800.222.7820
1
/ "
(638)
8
(762)
(2.7 m)
from the
(76)
round discharge, can be
D U C TW OR K
WARNING
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCTWORK.
The downdraft operates most efficiently with the fewest
number of elbows and transitions and when the ductwork
does not exceed 40' .
(12 m)