Residual Heat Indicator - Der Koch Eltz Manual De Instalación Y Funcionamiento

Plantillas de Vitrocerámica

Residual heat indicator

After a zone is switched off, the corresponding cooking zone
indicator will show a flashing letter "H". This means that the
temperature of the zone is over 60°C and is therefore still high
enough to cause an injury.
When the temperature of the zone drops below 60°C, then the
letter "H" will go out.
IMPORTANT: The residual heat indicator will disappear if the main
supply of the product is cut.
IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB ZONE,
EVEN WHEN THE TEMPERATURE OF IT HAS DROPPED BELOW
60°C.
Safety lock button
The whole hob top can be locked by pressing the safety lock
button whilst the appliance is switched on.
The timer display will show "L0" to indicate that the safety
lock feature has been activated.
When the safety lock has been switched on, it will disable any of the other
buttons on the control panel, apart from the
To disable the safety lock feature, you should press the safety lock button
again. The "L0" symbol will disappear from the timer display and you are then
able to adjust the power of any zone on the hob top.
The hob timer
Your hob has a timer which will countdown a period of time
between 1 and 99 minutes. At the end of the countdown
period an audible signal will sound.
Press the timer button, use the plus buttons and minus
buttons to set the countdown time.
www.derkochline.com
ON/OFF button.
Ceramic Hob
34