Der Koch Eltz Manual De Instalación Y Funcionamiento página 44

Plantillas de Vitrocerámica
IMPORTANT: There are ventilation holes around the outside of the
hob. YOU MUST ensure that these holes are not blocked by the work
top, when you put the hob into position (see drawing opposite).
IMPORTANT: Do not use a silicon sealant to seal the appliance against the
aperture. This will make it difficult to remove the hob from the aperture in
future, particularly if it needs to be serviced.
• Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
• There are holes on the base or the sides of the hob that you can fix the
four brackets to. There are three holes in each one of the brackets.
• You should place the bracket on the underneath of the hob, in a position
that is appropriate for the aperture that you have cut out. Using the
screws provided, fix the bracket to the hob. These screws MUST be
securely tightened.
www.derkochline.com
Ceramic Hob
43