Der Koch Eltz Manual De Instalación Y Funcionamiento página 42

Plantillas de Vitrocerámica
Carefully turn the hob back over and then gently lower it into the aperture
hole that you have cut out.
• There are holes on the base or the sides of the hob that you can fix the
four brackets to. There are three holes in each one of the brackets.
• You should place the bracket on the underneath of the hob, in a position
that is appropriate for the aperture that you have cut out. Using the
screws provided, fix the bracket to the hob. These screws MUST be
securely tightened.
www.derkochline.com
Ceramic Hob
41