Overview
Features
Accessories
DIN 25-pin assembled plug
Rack mounting kit
4
(EN)
The Sony YS-DX316P/216CE Multiplexer is designed for use with multiple
camera surveillance and monitoring systems. The unit has 16 video inputs,
allowing up to 16 video channels to be displayed on a single monitor. In
addition, a full screen image can be displayed for each input signal.
A built-in character generator enables you to superimpose letters and
numerals onto each picture. Upon receiving an alarm signal, the unit can
be programmed to switch the display to the relevant location.
• Settings entered by on-screen menus
Clock settings, Titles, Alarms, On-screen displays, Recording mode,
Alarm data
• Monitor 1 output screen
Split screen (divided in 16, 13, 10, 7, 4), full screen, sequence display, 2
times zoom (with selectable range), still image
• Monitor 2 output screen
Full screen, sequence display
• Camera title display (8 characters)
• Time display
• S-VIDEO output/input terminals (YS-DX316P only)
Cover nut
Plug plate
Mounting brackets
Nuts (M4)
DIN 25-pin plug components
Locking screw
Shielded cover A
Spring washers
Screws (M4 × 10)
Flat washers
E-rings
Shielded cover B