Setting The Incoming Mail List Screen Display Mode - Hitachi Sprint SH-P300 Guia Del Usuario

until you have selected all the e-mail messages you want to erase and
then press
Erase All:
Highlight
3.
Tip:
If you try to erase protected incoming e-mail, a confirmation screen
appears. Highlight Yes and press
Tip:
You can also erase the displayed incoming e-mail from the content
checking screen for the incoming e-mail.
Setting the Incoming Mail List Screen
Display Mode
You can use the procedure below to set the display mode for the incoming
mail list screen and the order in which incoming e-mail is displayed.

Setting the Incoming Mail List Screen Display Mode

To set the incoming mail list screen display mode:
Display the incoming mail list screen and press
1.
Highlight
2.
Highlight
3.
Select
4.
3 Lines:
Subject(1Line):
Sender(1 Line):
on 1 line.
Setting the Display Order for Incoming E-mail
To set the order in which incoming e-mail is displayed:
Display the incoming mail list screen and press
1.
Highlight
2.
Highlight
3.
Section 2: Understanding Your Phone
136 2J: E-mail
.
Erase
Erases all the incoming e-mail.
and press
Yes
Set Display
Display Mode
,
3 Lines Subject(1Line)
Displays the content of an incoming e-mail in 3-line blocks.
Displays the subject of an incoming e-mail on 1 line.
Displays the address of the incoming e-mail sender
Set Display
Display Order
.
OK
.
OK
and press .
OK
and press
OK
or
Sender(1 Line)
and press .
OK
and press
OK
Options
.
and press
Options
.
.
.
OK
.