Hkoenig MSX220 Manual De Utilización página 10

about 1 minute. When the blade is still, check to see if
any burr has formed on the edge. • After having verified
the presence of burr, switch (5) on and gently press
button (27) for about 3 seconds to remove the burr
produced during sharpening. Put the graduated knob (6)
back to "0" position. • After sharpening, move the
sharpener group (10) back to its original position, see
Fig. 3 and clean the edge of the blade and the wheels by
alcohol. • After several sharpening operations, remove
any residue from the sharpening wheel with alcohol and
a brush.
BLADE REPLACING
The blade has to be replaced when it is no more
possible to sharpen it or when the distance between the
cutting part of the blade and the blade protector is more
than 6 mm. Return appliance to the nearest authorized
service facility to replace the blade.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain hazardous substances that have harmful effects on the
environment or human health and should be recycled. The symbol here indicates
that electrical and electronic equipment should be chosen carefully, a wheeled waste
container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05