Waldbeck Yukon Manual De Instrucciones página 37

CONTROLS
Key overview
POWER
Press the button, the power is on, and press it once more, the power is off.
MODE
Press the MODE button to choose from the 4 operation modes circularly.
Boot setting is in the ALL METAL mode.
ALL METAL-The detector is in the ALL METAL mode, and to all kinds of
metals, the detector will make a respond.
a. ALL METAL – The detector is in the ALL METAL mode, and to all kinds
of metals, the detector will make a respond.
b. JEWELRY – the detector eliminates iron, which means it won't make a
respond to the iron, but only be in respond to other metals.
c. MEMORY – the detector will memory the selected metal, and only be
respond to this metal. Press the MODE button once, the detector goes
into the MEMORY state(the MODE cursor pointing to MEMORY),
at this moment, the six lower cursors all displaying, and the detector
goes into the memory state. Scanning above the search coil with the
selected metal, the detector will memory this metal, and will only
be respond to this metal. Press the MODE button again, logging out
the memory mode, return to the state that all of the 6 lower cursors
EN
37