EN
BASIC OPERATION
Metal detector is used outdoors. There is too much metals indoors, and all
kinds of electrical equipment that will bring interference signals. So it is not
fit for using the detector indoors.
Field detection is more complicated, the composition of the regional soil,
the component, size, shape and the oxidation degree of the underground
metals will all affect the detection results. This chapter is only the general
steps of the field detection. You should operate again and again, accumulate
experience to achieve good results.
1. Turn On
Hold the detector, keep the search coil be away from the ground. Press
the Power button, the detector will sound two beep tones, and all the LCD
patterns are lighted at minutes. Then the sensitivity will be set to the second
gear, and the operation mode will set to ALL METAL. Prompt once again, do
not operate, nor let the metal approach the search coil, until the balance has
been completed, and sound a tone.
2. Set the operation mode
In generally, you could choose the ALL METAL mode. At this time, the
detector will make identification response to all kinds of metals.
Since the soil will make the detection indication deviate, we suggest you
bring some samples, such as 25 ¢ silver coins, 5 ¢ nicker coins and so on. Bury
these samples in the soil of the detection region respectively, try to detect,
observe the position of the discrimination cursor appear, and how much
deviation from the target pattern. It will help you judge the type of the target,
in case you omit the treasures that you want to find.
Directly with the PINPOINT to detect, it is also an alternative way.
Specifically in the region where the ground is more complicated or in the
venues where the electromagnetic interference is larger, the effect may be
more better.
3. Choose the sensitivity
You always expect to set the sensitivity more higher. However, in the higher
sensitivity range, the detector will be sensitive to the electromagnetic
interference that comes from the power lines or cables around, and it will do
abnormal reaction to the mineralization soil or electrical conductivity soil.
44