Pro-Lift W-1802 Manual De Instrucciones página 3

Fig. 1
Sports Adapter Quick Connector
Fig. 3
Fig. 4
HOW TO USE
A. For use with high pressure inflatable items
1. With thumb latch Quick Connector open, place
securely onto tire valve stem (Fig. 1).
2. Use thumb to close Quick Connector, ensuring
that the thumb latch is as far down as possible
(Fig. 2).
3. Plug power cord into a suitable outlet or 12
Fig. 2 VDC source. Toggle air ON/OFF switch to ON
position. Unit should begin inflating.
4. Inflate until object reaches its original shape,
use pressure gauge as a reference for de-
sired pressure (determined from vehicle or tire
manufacturer's specification).
5. When near correct operating pressure, toggle
air ON/OFF switch to OFF and unplug the
inflator power cord.
B. For use with low pressure inflatables
1. To inflate air mattresses, beach balls, life jack-
ets, etc., select the suitable adapter (Fig. 3),
then insert and secure into the Quick Connec-
tor (Fig. 4).
2. Insert the connector adapter into the appropri-
ate receiver on the inflatable (Fig. 4).
3. Plug the inflator into a DC 12V outlet. Toggle
air ON/OFF switch to ON position. Unit should
commence inflation.
4. Inflate to a pressure or level of firmness rec-
ommended by the manufacturer. Toggle air
ON/OFF switch to OFF then unplug the power
cord from the DC 12V outlet.
5. Remove Quick Connect from the inflatable.
6. Remove the adapter from the Quick Connec-
tor.
7. Check for proper firmness and adjust as need-
ed.
3