Attention: Misplacing and misapplying the awning can cause
seriously danger. Only mount the awning yourself when you
derstand the mounting instructions completely and when you
are sure that the wall you want to mount the awning on is
suitable. For your own and the safety of other people please
contact an authorized assembler for help.
Drawing 7:
Install the ring as below show insert the ring into the Hexagonal rod (ring can't be reomove if you
insert it in place)
Usage
Adjusting Tilt Angle
The awning is already delivered with an
optimally adjusted tilt angle. However, users
can adjust the screen angle within a range of
5° to 30°. A tilt angle smaller than 14° is not
allowed – although the construction of the
adjustment mechanisms would allow having a
smaller angle.
Once the adjustment screw reaches its end position you may not turn it further. Do not
force it! Disobeying this instruction can lead to damage on the awning that can cause
hazard and void the warranty!
Extend the awning no more than 1/4 of its full projection before adjusting.
Figure 7:
Users may adjust the screen angle within a range of 10° to 40°.