TrOUbLESHOOTING
SetuP anD Configuration ProbLemS
1. HOw DO I CONNECT my CAmErA USING PLC?
We recommend that you use either the zero configuration or setup Wizard method described earlier
in this guide as they will automatically configure your camera for your network.
If you wish to use plc to connect your camera, follow these steps:
• press and hold the plc button on the back of the camera for 5 seconds. the green plc status
led will blink.
• press the plc button on your powerline adapter within the next 60 seconds.
2. wHICH POwErLINE ADAPTErS DOES THE DCS-6045L wOrK wITH?
the dcs-6045l is compatible with plc adapters using the standards listed below;
• homeplug 1.1
• homeplug aV
DCS-6045L
7