Cleaning And Maintenance; Technical Data; Spare Parts - Renfert Waxprofi Manual De Instrucciones

6. Cleaning and Maintenance

The Waxprofi is maintenance free.
From time-to-time, you should wipe your unit
down with a damp cloth.
Do not use solvents or cleansers.
Never rinse or spray your Waxprofi
directly with water!
If the unit switched off, you can remove hard-
ened wax residue by carefully scraping it.
Warming the unit's surfaces with a hair drier will
make it easier to remove wax residue.
The Waxprofi lid can be removed, allowing dirt
and other contaminants to be easily cleaned
under a steam jet.

7. Spare Parts

You can find components subject to wear and
the spare parts on the spare part list in the
internet at www.renfert.com/p918.
The components excluded from the warranty
(such as consumables or parts subject to wear
and tear) are marked on the spare part list.
Serial number and date of manufacturing are
shown on the type plate of the unit.
8. Warranty
Provided the unit is properly used, Renfert
warrants the Waxprofi for a period of 3 years.
The original sales receipt from the dealer must
be provided when making warranty claims.
Parts which are subject to natural wear and tear
(wear parts) and consumables are excluded
from the guarantee. These parts are marked in
the spare part list.
The warranty is voided in case of improper use;
failure to observe the operating, cleaning, main-
tenance, and connection instructions; in case of
independent repairs or repairs by unauthorized
personnel; if spare parts from other manufac-
turers are employed, or; in case of unusual
influences or influences not in compliance with
the utilization instructions. Warranty service
shall not extend the original warranty.
EN

9. Technical data

Mains voltage:
Power
consumption:
Minimum operating
temperature:
Maximum operating
temperature:
Dimensions
(W x H x D):
Pot size:
Usable pot volume:
Weight, approx.:
10. Standard Delivery
1 Waxprofi denture wax heating unit
1 Operating instructions
11. Accessories
Renfert recommends the following:
Electric wax knife:
Waxlectric I, incl. 1 handpiece and 1 modelling
insert:
No. 2156-0000 230 V
No. 2156-1000 120 V
Waxlectric II, incl. 2 handpieces and 2 model-
ling insert:
No. 2157-0000 230 V
No. 2157-1000 120 V
Waxlectric tips:
No. 2155-0104 1 blade, narrow
No. 2155-0105 1 blade, wide
No. 2155-0106 1 blade, chamfer
No. 2155-0110 1 blade, lance
Bunsen burner:
Bijou 90:
No. 960-0000 Liquid gas
No. 961-0000 Natural gas E
Safety burners:
No. 933-0100 Liquid gas
No. 932-0100 Natural gas E
Safety burners eco:
No. 934-0100 Liquid gas
No. 935-0100 Natural gas E
- 4 -
220 - 240 V~, 50/60 Hz
100 - 120 V~, 50/60 Hz
120 - 140 W (220 - 240 V~)
120 W (100 - 120 V~)
40 °C [104 °F]
110 °C [230 °F]
178 x 54 x 120 mm
[7.01 x 2.13 x 4.72 inches]
185 ml [6.26 fl oz]
110 ml [3.72 fl oz]
600 g [21.2 oz]