Ego Power+ CS1800 Manual De Usuario página 27

5. Press and hold the lock-off button with the thumb of your right hand, then
squeeze the variable-speed trigger switch with the fingers of your right hand to
start the saw. Chain speed will increase with increased pressure on the variable-
speed trigger.
6. Release the lock-off button and continue to squeeze the variable-speed trigger
switch for continued operation.
To Stop (Fig. 12)
1. Move the chain saw away from cutting area, and then release the variable-speed
trigger switch to stop the chain saw.
2. Push the chain-kickback brake handle forward to the brake position to engage
the chain brake (see Fig. 1).
WARNING:
breaks and after finishing work.
LED HEADLIGHTS (Fig. 13)
The LED headlights are located in the
front of the chain saw power head. This
feature provides extra light for increased
visibility and can be adjusted to 2
brightness levels.
To turn on the lights, press the LED button
one time. The headlights provide bright
light in front of the chain saw. Press the
LED button a second time and the headlights shine more brightly.
To turn off the headlights, press the LED button a third time.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
Always remove the battery pack from the chain saw during work
13
LED Button LED Headlights
27