Product Contents - VWR 250V Manual De Instrucciones

condensation may occur.
3. To avoid condensation after operating the power supply in a cold room, wrap the unit in a
plastic bag and allow at least 2 hours for the unit to equilibrate to room temperature before
removing the bag and operating the unit.
Symbols
Used on the 250V Power Supply to indicate an area where a potential shock
hazard may exist.
Used on the 300V Power Supply to indicate an area where a potential shock
hazard may exist.

Product Contents

Types of Products
This manual is supplied with the following products:
Product Catalog no.
250V Power Supply (115 / 230 VAC switch-able, 50/60 Hz) VWR 250V
Product Contents
Component
250V Power Supply
Instruction Manual
Extra Fuse
Power Cord
Warranty Card
Upon Receiving the Instrument
Examine the unit carefully for any damage incurred during transit. Any damage claims must be
filed with the carrier, keep the supplied box for inspection. The warranty does not cover
in-transit damage.
To ensure safe, reliable operation, always operate the 250V Power Supply in
accordance with the manufacturer's instructions. Always wear protective gloves
and safety glasses when working in a laboratory environment. See safety
information on pages v-vii. Warranty information is provided on page 19.
Quantity
1 each
1 each
1 each
1 each
1 each
4