Setting Watering Programs - claber Aquadue DUPLO Evolution Manual Del Usaurio

Programming

SETTING WATERING PROGRAMS

The Timer has two outlets for automatic watering of two independent zo-
nes up to six times a day.
Each line has three programs per day.
The timer works on a 24 hour clock (i.e. 2 pm = 14:00) therefore prior to
setting the programs, make sure your scheduling falls within a 24 hour
window.
Program 1 must corresponds to your earliest watering cycle of the day be-
cause all following programs move forward in time from program 1.
(i.e. if program 1 is set up to start at 16:00 = 4 pm, there are 8 hours left in
which the remaining programs can be set).
01_26_8410_DUPLO_USA_EN.indd 11
Programs 1,3,5 run on line A (left outlet).
Programs 2,4,6 run on line B (right outlet).
US
11
03/07/14 13:46