Weekly Schedule - claber Aquadue DUPLO Evolution Manual Del Usaurio

Programming

WEEKLY SCHEDULE

Weekly schedule effects both lines and all set programs.
How to enable or disable a day of the week for automatic watering:
1. Press
2. Use the two arrow Keys
3. Press
4. Once the weekly schedule has been completed move
01_26_8410_DUPLO_USA_EN.indd 15
3 5
3 4 5 6
1 2
SUN MON
(the icon will appear).
OK
desired day.
one or more times until the corresponding day number
appears for the day to be a "watering day" or disappers for the day to be
a "not watering day".
then press .
Once programs are set (i.e. 1, 2, 3 and 5) they
are visible by a numbered digital block on top of
all pages.
Number corresponding to the program currently
in operation flashes until program is over.
Use the two arrow Keys
through the pages until the display shows the
weekly page where numbers from 1 to 7
represent the days of the week, as shown in
the table below:
3 4
TUE WED THU
or to move
or to move
5 6 7
FRI SAT
below the location of the
below EXIT
US
15
03/07/14 13:46