Led Indicators; Connectors And Buttons - Axis Communications A1001 Manual De Instalación

AXIS A1001 Network Door Controller

LED Indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Lock Green
Red
Unlit
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup >
Additional Controller Configuration > System Options > Maintenance .

Connectors and Buttons

For specifications and operating conditions, see page 20.
I/O Interface
Reader Data Connectors
Two 6-pin terminal blocks supporting RS485 and Wiegand protocols for communication with the
reader. For specifications, see page 22.
Reader I/O Connectors
Two 6-pin terminal blocks for reader input and output. In addition to the 0 V DC reference point
and power (DC output), the reader I/O connector provides the interface to:
• Digital input – For connecting, for example, reader tampering alarms.
• Digital output – For connecting, for example, reader beepers and reader LEDs.
For specifications, see page 23.
Indication
Steady for connection to a 100 MBit/s network. Flashes for
network activity.
Steady for connection to a 10 MBit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Steady when not energized.
Steady when energized.
Floating.
18