Operating Instructions - Vroom 88500 Manual Del Usario

included
• Vroom Hose Management Cabinet– with retractable hose featuring crevice tool hose end
• Vroom Vacuum Motor with Shelf
• Convertible Floor/Rug Tool
• Adjustable Wand
• Installation Components
General informaTion
Vroom is a built-in, self-contained, hose management system designed specifically for
quick cleanups. The Vroom Solo comes in two (2) pieces: the vacuum motor and the hose
management cabinet allowing for a flexible installation.
Located near high-traffic areas, such as kitchens, bathrooms, laundry rooms and garages,
Vroom installs easily inside most standard base cabinets. To operate reach inside the cabinet,
lift up on the hose handle which automatically starts the system allowing you to quickly clean
up any dry mess. When vacuuming is complete, the hose automatically retracts and the system
turns off when the handle is replaced in the docking station.
WarranTy reGisTraTion
Registration of the Vroom ensures a fast and easy resolution to your warranty requirements
should they arise. To register simply register online at www.VroomRegistration.com or complete
the green registration card located with your Vroom Hose Management Cabinet.

operaTinG insTrucTions

The Vroom turns on automatically by pulling up and slightly twisting the handle from the docking
station. The handle docking station needs to be at a 90° angle to activate the vacuum system.
To vacuum pull out the amount of hose you need (the hose extends
up to 24 feet) and clean up dry spills in seconds. The vacuumed
debris that is cleaned up will be transported to the canister. The
airflow from your vacuum system will assist in retracting the hose.
Simply walk the hose back toward the cabinet.
The system will shut off when you place the hose
handle back into the docking station.
10
Operating Instructions