Markin Central Station 3 Montaje E Instrucciones página 54

Configuring mfx Locomotives
Running a Locomotive with Address Control
Enter the address for the locomotive on the
numerical keypad that opens and select
the protocol for the decoder in use.
The address entered is automatically taken
into the locomotive controller (in the exam-
ple to the right the address 25).
Now you can run the locomotive directly.
You can change the address and protocol
at any time for such an address control
locomotive: Simply tap on the address
display. The keypad will then appear again
(right image).
All detail settings for a
locomotive decoder are
loaded as soon as you open
the tab „Configuration" in the
locomotive settings for an mfx
locomotive.
The blue areas are only
intended for experts. Please
change something only when
you know what you are doing.
You must make no modifica-
tions in this location in normal
operation.
Tap in the locomotive list on the tool
symbol („Edit") in order to control and
run a locomotive directly by means of its
address and then select the „Add direct
address drive" (left image) in the drop-
down menu that opens.
Putting Locomotives into a Multiple Unit (m.u.) Combination
Pull the desired locomotives from
the locomotive list into the entry
template with a wipe of your
finger in order to create a multiple
unit combination (center image to
the right). Confirm by tapping on
„Ok" – and the new multiple unit
combination will appear in the
locomotive list (right image).
Finding Lost mfx Locomotives
You create a double or multiple unit (m.u.)
combination of locomotives with the menu item
„Create M.U. Set" (left image). Open the
drop-down menu with a tap of your finger on
the tool symbol in the locomotive list („Edit").
You can give the new multiple unit combination
a name in the entry template that turns on after
that.
In rare cases, it can happen that an mfx
locomotive is no longer displayed in the
locomotive list. This option can be helpful.
All of the existing data are checked and
the system investigates for missing mfx
locomotives.
You start the function in the locomotive list by
means of the button „Edit" and then with a tap
of your finger on „Rediscover lost mfx
locomotives".
14