Attaching The Lead Wires; Electrode Selection And Care - GF Grafco -3 Manual De Operación

ATTACHING THE LEAD WIRES

WARNING: Ensure the device is OFF before connecting the lead wires.
WARNING: Never insert the lead wire plug into an AC power supply socket.
Personal injury and/or damage to the TENS unit could occur.
s CAUTION: Use care when you plug and unplug the wires. Pulling on the lead
wire instead of its insulated connector may cause wire breakage.
The lead wires provided with the device insert into the ports located the top
of the unit. After connecting the wires to the unit, attach each wire to an
electrode.
Lead wires provided with the device are compliant with mandatory compli-
ance standards set forth by the FDA.

ELECTRODE SELECTION AND CARE

Using Electrodes
Use the electrodes as prescribed. Follow application procedures outlined in
electrode packaging to maintain stimulation and prevent skin irritation. The
electrode packaging provides instructions for care, maintenance, and proper
storage of electrodes.
8