auna Kara Super Star Manual De Instrucciones página 21

connector plug (2).
4. The microphone bracket (wider outer pole) socket and Microphone
holder and cradle connector plug (5).
5. Fully insert the cradle connector into the Microphone stand (upper pole)
and fix it by fixing screw (included) (4).
6. Turn the height adjusting knob in counter-clockwise direction to loosen
the joint, then move upper pole up and down to adjust the microphone
stand to desired height.
• Notes:
• For your safety, please do not insert your tablet or smartphone into
the Tablet/Smartphone holder to avoid accidental falling during stand
height adjustment.
• Use one hand to hold upper pole of microphone stand while using the
other hand to loosen the knob to avoid sudden falling of upper pole
assembly.
7. After stand height is set, tighten it up by turning the height adjusting
knob in clockwise direction (3).
8. Move the unit to the location you want to play and connect accessories
by following operations in the user manual.
WARNING: - When moving the unit to other locations, please use both
hands to hold the base. Do not grip the mic stand to move the unit. If you
do, the heavy base may accidentally fall to the ground which may result in
damage. This will void the warranty.
EN
21