Bt Operation; Resetting The Unit - auna Kara Super Star Manual De Instrucciones

BT OPERATION

The unit has a Bluetooth function that can receive a signal within 8 metres.
Pairing the unit with a Bluetooth device to listen to music:
1. Press the POWER button to turn on the unit, tap the FUNCTION button to
select BT mode.
2. If the unit is not paired with any Bluetooth device, the display will flash
"BT ".
3. Activate your Bluetooth device and select the search mode.
4. "Auna Kara" will appear on your Bluetooth device list.
5. Select "Auna Kara" and enter "0000" for the password if necessary.
6. To disconnect the Bluetooth function, press the FUNCTION button to
switch to another mode or disconnect the function from your Bluetooth
device.
NOTE:
• If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
• For a better signal reception, remove the obstacles between the unit
and the Bluetooth device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile) functions. This can only be
paired with one Bluetooth device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the Bluetooth function may connect and
disconnect as you make and end calls. This is not an indication of a
problem with your unit.

RESETTING THE UNIT

If the system does not respond or exhibits erratic or intermittent operation,
you may have experienced an electrostatic discharge (ESD) or a power
surge that triggered the internal microcontroller to shut down automatically.
If this occurs, simply disconnect the AC Adapter. Wait for at least 3 minutes
and then setup the unit again as if you were using it for the very first time.
EN
27