Quick Installation Guide; Package Contents - U.S.Robotics USR5436 Guia De Instalacion

Quick Installation Guide

Package Contents:

USR5436 Wireless USB Print Server Quick Installation Guide
5VDC Power supply
What you need to begin
• Windows-based PC with a Network Interface Card (NIC) connected to your network
• The Installation CD-ROM that came with your printer
• A browser that supports HTML 4.01 specification
• An Ethernet cable
• A USB cable
Physical Features
LED Information
Status LED Error LED
Off Off
On
On Off
Blinking Off
Blinking Blinking
Side Panel Port Information
DIAG Use this button to either print a diagnostic page or to restore the factory
default settings.
USB Port Use this port to connect a USB printer to the Wireless USB Print Server.
LAN Port Use this port to connect the Wireless USB Print Server to a router, switch, or
other Ethernet network device.
POWER Use this port to connect the power supply to the Wireless USB Print Server.
Note: For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more
detailed information.
Installation CD-ROM with User Guide
Description
There is no power
On There is a hardware error
Normal operation (idle)
Data is being transmitted or received
Firmware upgrade is in progress
1