Troubleshooting - JVC Everio GZ-MS110 Guia Basica Del Usuario

Troubleshooting

Before requesting service, consult the following chart or the "Troubleshooting" section in
the Detailed User Guide.
If the solutions indicated in the chart do not solve the problem, consult your nearest JVC
dealer or JVC service center for instructions. Refer also to the FAQ of new products on
JVC's website. Refer also to the Q&A information of new products on JVC's website
(http://www.jvc.com).
This unit is a microcomputer-controlled device. Electrostatic discharge, external noise
and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In
such a case, reset this unit.
■
Reset this unit when it does not function properly or when "...
Error" appears on the screen.
① Turn off the power. (Close the LCD monitor.)
② Remove the AC adapter and battery pack from this unit, reattach them, and
turn on the power again.
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops by
itself.
No date/time display.
Sound or video is
interrupted.
For more information, refer to the Detailed User Guide
22
http://manual.jvc.co.jp/index.html/
Action
●
The battery pack is being charged.
●
Set to the recording mode with the
button.
●
Turn off this unit, wait for a while, and
turn it on again. (This unit stops
automatically to protect the circuit
when the temperature rises.)
●
Recording stops automatically after
12 hours of continuous recording.
●
Set "ON-SCREEN DISPLAY" in the
playback menu accordingly.
●
Sometimes playback is interrupted at
the connecting section between two
scenes. This is not a malfunction.
Page
P.6
P.13
-
-
-
-