Preliminary Position - Seiko 8B92 Manual De Instrucciones

Press Button A to set
2
the date.
* If not correcting the date, go to
procedure 3.
One day Press Button A once and then
Advance release it.
When Button A is kept pressed for
Continuous two seconds or longer, the date will
Advance start to move. Press Button A again
to stop.
A
46
8B92_E_42-66.indd 46-47
Push the crown back in.
3
Operation has been completed.
The watch resumes its normal movement.
0 1 2

PRELIMINARY POSITION

When the watch is unable to display the precise time or date even if it successfully receives a
radio signal, or when the stopwatch hands do not stop at the 0-position even after resetting
the stopwatch, the preliminary position may be misaligned.
The preliminary hand position may be misaligned due to the following reasons:
• In the case of a strong impact : Misalignment may occur when dropping or hitting the watch.
• In the case of a magnetic influence : Misalignment may occur when bringing the watch close to
an object which generates magnetism.
■
Automatic Hand Position Adjustment Function (Function to automatically
adjust
the preliminary position of the hand)
The hour, minute, and second hands have an "Automatic Hand Position Adjustment Function,"
which automatically corrects an incorrect preliminary position. It activates once a minute for the
second hand and at 12:00 both for the AM and PM for the hour and minute hands.
* This function works when the preliminary hand position is misaligned due to external factors
such as strong impact or magnetic influence. It does not work to adjust accuracy of the watch
or slight deviations which may occur during the manufacturing process.
* The preliminary position of the hour and minute hands can also be manually adjusted.
■
Setting the Preliminary Position of the Date/Stopwatch Hands
Since the preliminary position of the date and stopwatch hands is not automatically adjusted, it
must be adjusted manually.
47
2016/04/27 15:55