How To Select The Time Zone - Seiko 8B92 Manual De Instrucciones

HOW TO SELECT THE TIME ZONE

(HOW TO DISPLAY THE LOCAL TIME AROUND THE WORLD)
Continue to press Button A (for 3
1
seconds), and when the stopwatch
1/5-second hand starts to move
clockwise, release it.
The watch switches to the time zone adjustment
mode and stops by the time zone set currently.
A
* When a no movement state of the stopwatch 1/5-second
hand is kept for ten seconds or more, the watch automatically
switches to the time display state. When it is in the middle of
operation, re-attempt the operation from procedure 1.
* If the stopwatch hands are not reset to the 0-postion, it is
not possible to set the time zone (the second hand does not
stop). Reset the stopwatch and re-attempt procedure 1.
22
8B92_E_1_37.indd 22-23
Press Button A or Button
2
B to set the stopwatch
1/5-second hand to the local
time zone of a desired area.
With each pressing of the button, the
stopwatch 1/5-second hand moves
to the adjacent time zone index. The
position of stopwatch 1/5-second
hand indicates the time zone.
B
A
The radio signal transmitting station can
be changed by selecting the time zone.
When selecting a time zone for regions
other than the reception ranges, the radio
signal reception function will not work.
* When setting the daylight saving time (DST),
add one hour to the time zone of a desired
area.
Wait for ten seconds. after
3
the hour hand stops.
(The time zone adjustment
mode is finished.)
After ten seconds, the stopwatch
1/5-second hand automatically
switches to the 0-position.
* In case the date changes, the watch
adjusts automatically after the
stopwatch 1/5-second hand switches
to the 0-position.
23
2016/05/06 13:55