Operation; Grounding Instructions - Pinnacle Sun-Stream SSR-808G-IHR Manual De Usuario E Instrucciones De Funcionamiento

Operating The Heater:
Heater Controls
1. Plug power cord into 120V AC power outlet.
(See Grounding Instructions)
2. Use pull cord to turn power to heater on and
off.
© 2018, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE

Operation

Grounding Instructions

SSR-808G-IHR:
– This heater is for use on 120 Volts. The
cord has a plug as show at A (below). An
adapter as shown at C is available for
connecting three-blade grounding-type plugs
two-slot receptacles. The green grounding
lug extending from the adapter must be
connected to the permanent ground such as
a properly grounded outlet box. The adapter
should not be used if a three-slot grounded
receptacle is available.
Figure 4
6
Grounding Methods
Metal Screw
B
A
Halogen Infrared Heater User's Manual
C
Grounding Means
Grounding Pin