Mechanical Installation; Installation Information - Lenze L-force MCA Esquema De Conexiones

3

Mechanical installation

Installation information

3 Mechanical installation
Installation information
ƒ Before transport
– Check that all transport locking devices are mounted.
– Tighten all transport aids.

Note!
Do not apply extra loads to the product as the transport aids (such as eye bolts
or bearing plates) are designed for the weight of the motor only (refer to the
catalogue for the weight).
ƒ Use an appropriate means of transport and lifting equipment!
ƒ The shaft must not be exposed to knocks or bumps! Motor can be destroyed! Drive
elements must be mounted on the motor shaft via the threading. An extracting
device must be used when dismounting. Fasten coupling securely.
ƒ Fasten motor and ensure unimpeded ventilation.
ƒ Tighten coupling ring of connector.
ƒ Motor must be carefully earthed, check cabling.
ƒ Extensive shielding of motor cable on motor and controller.
24

ASPL 33.0006 DE/EN/FR/ES/IT 2.0