Battery Maintenance; Transporting Machine - Tornado 2500B Glazer Manual De Operación Y Mantenimiento

Check battery fluid level frequently on Wet-Acid batteries to prevent battery damage.
Add distilled water if low. DO NOT OVERFILL, the fluid may expand and overflow when
charging.
WARNING: Fire or Explosion Hazard. Batteries Emit Hydrogen Gas. Keep Sparks
And Open Flame Away. Keep Battery Compartment Open When Charging.
1. Clean the batteries to prevent battery corrosion. Use a scrub brush with a mixture of
baking soda and water
FOR SAFETY: Wear protective gloves and eye protection when handling batteries and
battery cables. Avoid contact with battery acid.

TRANSPORTING MACHINE

When transporting the machine by use of trailer or truck, be certain to follow the tie-down
procedures below:
ATTENTION: Tilt the machine back on its rear wheels when loading and unloading to
prevent dust skirt damage.
1. Load machine using recommended loading ramp.
FOR SAFETY: Do not lift machine if batteries are installed
2. Position the front of the machine up against the front of the trailer or truck bed.
3. Place blocks behind the main wheels.
4. Place tie-down straps over top of machine and secure straps to floor. It may be
necessary to install tie-down brackets to the floor of your trailer or truck.
NOTE: Do not use control grips to secure machine for transporting.
FOR SAFETY: When transporting machine, use a recommended ramp when loading
/unloading on/off truck or trailer.
ATTENTION: Do not transport machine tilted back, battery acid may leak
Storing Machine
Store machine in a dry area in the upright position.
ATTENTION: Do not store machine tilted back, battery acid may leak.
ATTENTION: Do not expose machine to rain. Store indoors.
1.800.VACUUMS a new spin on cleaning

BATTERY MAINTENANCE

a Tacony Company
17