Operations; Machine Installation - Tornado 2500B Glazer Manual De Operación Y Mantenimiento

Uncrating Machine
Carefully check carton for signs of damage. Report damages at once to carrier.
Check Machine Contents to ensure package is complete. Contact distributor for missing items.
Machine Contents:
2 - Battery Cables
1 - Battery Tray
3 - 12V Batteries
2 - Filter
1 - Pad Driver (requires appropriate floor pad prior to use)
To uncrate your machine, remove straps and carefully lift or use ramp to remove machine off pallet.
Do not roll machine off pallet, damage may result.
ATTENTION: To prevent machine damage, install batteries after removing machine from pallet.
FOR SAFETY: When transporting machine, do not lift machine if batteries are installed.
Installing Batteries
WARNING: Fire or Explosion Hazard. Batteries Emit Hydrogen Gas. Keep Sparks
And Open Flame Away. Keep Battery Compartment Open When Charging.
FOR SAFETY: When servicing machine, wear protective gloves and eye
protection when handling batteries and battery cables. Avoid contact with battery
acid.
Recommended Battery Specifications:
Three 12 volt, deep cycle batteries.
1. Park machine on a level surface
2. Turn OFF all switches.
1.800.VACUUMS a new spin on cleaning

OPERATIONS

Machine Installation

a Tacony Company
7