Safety Instructions - TECshow MINI UV BAR Manual De Usuario

2. CAUTION
Before out factory, this device passed strict inspec-
tion, functions stable and perfect packing. If this
device will be operated in any way different to the
one described in this manual, the product may suf-
fer damages and the guarantee becomes void. Fur-
thermore, any other operation may lead to dangers
like short circuit, burns, electric shock, crash etc. If
any technology changes of this manual, company
do not notice in further and have interpretation.
Keep this device away from rain and
moisture.
Unplug mains lead before opening the
housing.
WARNING: Damages caused by the disre-
gard of this user manual are not subject
to warranty. The dealer will not accept liability
for any resulting defects or problems.
Symbol Instruction On The Device
CE compliant
Only indoor use
RoHS Certificate
The minimum distance from lighted
objects (meter)
Max. Ambient Temp
Max. Housing Temp
Safety caution
Careful burns
Electric shock caution

Safety Instructions

• Once after received this product , please take
and put carefully. And check cautiously that
whether the product was damaged or not
during the transportation, if yes, please not
use this fixture and contact local dealers or
manufacturers as soon as possible.
• The applicable temperature for the lighting is
below 40°C. Do not use the lighting above the
temperature.ta=40°C
• The fixture applicable widely, it must keep-
ing clean, Please do not in overheat or dusty
environment use the device. Do not touching
Chemical liquid.
• Should be paid attention to the use of this
product: fire, heat, electric shock, loss caused
by severe or fatal injury, in electricity or to read
the instructions before installation, follow the
safety instruction and pay attention to the
manual and warning signs on the equipment, if
you have any other questions about how safe
operating equipment, please contact the deal-
er or manufacturer as soon as possible.
• According to the procedures described in this
operating instructions, please do not open
by yourself. Any break, please contact pro-
fessionals, and must by the professional and
technical personnel for repair.
• Do not power in and open before installation.
Let have a rest when continuous work for
eight hours. It will longer the device using lift.
• Fixed installation, to prevent the strong vibra-
tion or impact of the device.
• The distance between the device and the
projectile to keep at least 0.5 meter.
• Never look directly into the light source,as
sensitive persons may suffer an epileptic
shock (especially meant for epileptics).
• When light output position of the device of
dustproof glass breakage, cracks or other vis-
P. 3
English version | Tecshow Mini UV Bar