Bluetooth Link - JMA MULTICODE DUPLA Manual De Uso

9.1 BLUETOOTH LINK

The machine comes with a Tablet, with the application so the MULTICODE DUPLA can function, but the JMAKeyPro
application can be installed in any Tablet with a screen of 8" or more and with Android 4.4.2 "Kitkat" or later. In the
case of changing the Tablet, and using another Tablet to control the MULTICODE DUPLA, first you will have the couple
the Tablet and the machine. To do that, proceed as follows. Switch on the MULTICODE DUPLA machine and see if the
green diode comes on steady, this means that the machine is initialized and ready. Make sure the Bluetooth diode is
not on, this means that the machine is already connected to a Tablet and therefore it cannot be coupled to another
Tablet. If the blue Bluetooth diode is off, we can continue with the coupling.
• Enter into the settings section (A) of the Android Tablet.
• In settings, we go to Bluetooth (B) in the section of wireless connections and networks:
68