Hansgrohe Axor Starck 10402001 Manual Del Usuario página 4

4
English
Rough in
This unit requires two ½" NPT female fittings, recessed
⅜" behind the surface of the finished wall.
Installation
Wrap the threads on the s-unions with Teflon tape.
Screw the s-unions into the female fittings.
Align the unions so that they are level and are 5⅞"
apart on center.
The end of the s-union should extend 1⅜" outside the
surface of the finished wall.
Seal the wall around the connectors
with waterproof sealant.
Failure to seal the wall can lead to
possible water damage.