Technical Data - METAWOOD MTTM2000-355 Traducción De Las Instrucciones Originales

TECHNICAL DATA

Mains voltage V
Mains frequency Hz
Power input W
No load speed min-1
Disc diameter mm
Blade bore mm
Max. thickness cutting disc mm
Max. depth of cut mm
Mitre angle °
Weight kg
Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 90 dB(A) K =
Acoustic power level
103 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : < 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
TRANSPORTING THE MACHINE
Fully depress the head of the machine.
Slide the chain (28) with one of the links
(29) over the notch (30) so that the head
is locked in the lowest position. Keep the
chain as short as possible.
230
50
2200
3600
355
25.4
3.0
110
0-45
19
dB(A)
3
ATTENTION !
must be worn.
Carry the machine at the transport handgrip (12)
while transporting the machine.
CAUTION:
• Always secure all moving portions before carrying
the tool. If portions of the tool move or slide while
being carried loss of control or balance may occur
resulting in personal injury.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Made in China
21
Should your machine need
replacement after
extended use, do not put it in
the domestic waste but
dispose of it in an
environmentally safe way.
2013