Safety Warnings; Installation/ Mounting - Caframo Pali 9510CA-BBX Instrucciones De Operación

IMPORTANT - READ AND SAVE THESE INSTRUCTIONS!
Thank you for purchasing Pali, the Caframo Marine 400W Engine Compartment Heater.
Pali is designed to maintain the temperature in your engine compartment above freezing,
preventing damage from a sudden cold snap.

SAFETY WARNINGS

This heater is intended for use solely as a marine engine compartment heater. This heater
is not to be used for any other applications such as room heating.

INSTALLATION/ MOUNTING

While boat is in motion the Pali must be secured to the mounting bracket.
1. Vertical Secured Mount
Separate the Quick Mount Bracket from
the heater. Using a minimum of 4 screws
securely attach the Quick Mount Bracket
directly to the bulkhead of the vessel
within the engine compartment.
OPERATION
Pali 9510 (Automatic Thermostat)
The Pali 9510 automatically cycles ON/OFF to regulate and maintain desired
temperature. Connect the Pali 9510 to the secured Quick Release Bracket or lay it
collect water. Plug the heater into the appropriate 120V outlet. The LED will become
green once your unit is plugged in, indicating the unit has power and is ready to operate.
The Pali 9510 will automatically activate when the engine compartment ambient
temperature drops to 41°F (5°C). The LED will become red indicating the unit is
now running.
Pali is designed to continuously protect up to an 80 ft³ engine compartment at -4°F (-20°C)
outside temperature.
2. Horizontal Use Un-secured
(Ensure boat is motionless when using
this option.) Pali can be used without
,
*
mounting the unit to the bulkhead or engine
any dry surface.
* SCREWS NOT SUPPLIED
3