Altec Lansing T515 Guia Del Usuario página 3

The lightning flash with arrowhead,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
C
AUTION
To prevent electric shock do not use this (polarized)
plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
W
ARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
C P
ONNECTING THE OWER
(AC W O )
ALL UTLET
Snap plug into power supply and then insert the blades
into the outlet. Please note, the T515 can also be
powered with four AAA batteries.
I S I
MPORTANT AFETY NSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water — This
apparatus shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. The
apparatus should not be situated on a bed, sofa, rug
or similar surface that may block the ventilation
openings. The apparatus must not be placed in a
built-in installation, such as a closed bookcase or
cabinet that may impede the flow of air through the
ventilation openings. Ventilation should not be
impeded by covering the openings with items such
as newspapers, tablecloths, curtains, etc.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Caution: To prevent the risk of electric
shock, do not remove cover (or back).
No user-serviceable parts inside. Refer
servicing to qualified service personnel.
C
ORD
10. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for the
replacement of the obsolete outlet.
11. Protect the power cord from being walked on or
pinched — particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
12. Do not install in an area which impedes the access to
the power plug. Disconnecting the power plug is the
only way to completely remove power to the
product and must be readily accessible at all times.
13. Power source — Use only power supplies of the type
specified in the operating instructions or as marked
on the appliance. If a separate power supply is
included with this apparatus, do not substitute with
any other power supply — use only manufacturer-
provided power supplies.
14. Unplug this apparatus during lightning storms or
when unused for long periods of time.
15. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped. For service, refer to
qualified service personnel, return to the dealer, or
call the Altec Lansing service line for assistance.
16. For products which incorporate batteries, please
refer to local regulations for proper battery disposal.
17. Only use attachments/accessories specified by
the manufacturer.
18. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
3
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.