Amplicom PowerTel 680 Guia Del Usuario página 46

A M
NSWERING
Set the answer mode
Choose the answer mode: Answer & Record or Answer only. With the machine
in Answer only mode, callers will not be able to leave a message.
1. Press to switch the answering machine on.
2. To change the mode between Answer & Record, Answer Only or
Answer Off, press and hold
Check the outgoing message
Press to hear the current outgoing message.
Record an outgoing message
The outgoing message must be less than two minutes long. To change the
default answering message:
1. Press and hold
after the beep.
2. To stop recording, press
.
Note: to return to the default message, press and hold
ing message is playing.
46
ACHINE
for two seconds.
on the base for two seconds. Record the new message
. To listen to the recorded message, press
while the outgo-
Service Center