Amplicom PowerTel 680 Guia Del Usuario página 62

A H
DDING A ANDSET
3. Scroll using
4. Scroll using
is highlighted, and press
5. On the copy-to handset, press
Setting or Changing system PIN code
1. Open the menu by pressing
settings is highlighted and press
2. Scroll using
3. Enter the old PIN code (default PIN is 0000) and press
4. The phone will prompt for a new 4 digit PIN code (entered twice), press
Important: Do not change or reset the PIN code unless instructed by customer
service.
62
or until Copy is highlighted and press
or until the handset (e.g. 2, 3 or 4) to copy the profi le to
.
, then scroll using
or until System PIN is highlighted and press
to confi rm or
.
.
to cancel.
or until Base
.
.
Service Center
.