Sleep Mode - NuWave OxyPure Manual Del Usuario

FAN
ULTIMATE
SPEED
CLEAN
LOW HIGH

SLEEP MODE

RESET FILTER 2
HOLD FOR 2 SECONDS HOLD FOR 2 SECONDS
FAN
TIMER
SPEED
HIGH HR
SLEEP MODE
16
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
ULTIMATE CLEAN with TURBO
Cleans at the highest fan speed for ½ hour and will switch to
"ULTIMATE CLEAN" mode.
Press "ULTIMATE CLEAN". ULTIMATE CLEAN will be lit green.
1.
Press "TURBO". Default is ½ hour and can adjust from
2.
1 to 2 hours.
Press "TURBO" a fourth time to turn off.
3.
RESET FILTER 2 RESET FILTER 4
HOLD FOR 2 SECONDS HOLD FOR 2 SECONDS
FAN SPEED
Adjust from 6 speeds (LOW to HIGH).
TIMER TURBO
Press "FAN SPEED" to adjust.
1.
HR HR
To go back to the lowest level of fan speed, continue to press
2.
WIFI
"FAN SPEED" until the first bar is lit.
SLEEP MODE
When in Sleep Mode the LED lights will be off but the fan will
still be active. Adjust the fan speed prior to going into
Sleep Mode.
Manually adjust FAN SPEED.
1.
Press and hold "FAN SPEED" for 2 seconds to activate
2.
SLEEP MODE.
Unit will run under the fan speed that was previously selected.
•
To turn off Sleep Mode, press any button.
3.
Note: ULTIMATE CLEAN and TURBO will work during Sleep Mode.
TIMER
RESET FILTER 4
Use the TIMER function to choose the duration of operation.
Press "TIMER". The bar next to ½ hour will be lit.
1.
AIR
TURBO
There are 6 preset times to choose from.
•
HR CLEAN DIRTY
Press "TIMER" to increase time.
2.
WIFI CLEAN
FILTER 2
Choose from ½ hour, 1, 2, 4, 8, or 12 hours.
•
After pressing "TIMER" six times, all bars will be lit.
•
Press "TIMER" once more to turn TIMER off.
3.
AIR ODOR
NO STRONG
CLEAN DIRTY
ODOR ODOR
CLEAN REPLACE
FILTER 2 FILTER 4
ODOR
NO STRONG
ODOR ODOR
REPLACE
FILTER 4