Care & Maintenance - NuWave OxyPure Manual Del Usuario

Ocultar thumbs Ver también para OxyPure:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS (Continued)
The OxyPure can easily be moved from one location to another. Just hold the
OxyPure by the handles on each side and roll the unit to the chosen location.
The wheels underneath provide extra maneuverability and mobility whenever
it's needed.
Before First Use
Wipe Top Vent and In Flow Vent with a slightly damp cloth or paper towel.
Dry thoroughly before use.
After Use
The OxyPure should be cleaned periodically and after excessive use to ensure
proper performance and function. To clean the outsides of the OxyPure, use a
cloth or paper towel to remove dust and other particles. For tougher buildup,
use a damp cloth or paper towel and dry thoroughly.
Cleaning the Top Vent and In Flow Vent
Use a soft brush to remove dust and debris.
1.
If needed, use a slightly wet paper towel or damp cloth to remove larger
2.
buildup. Do not use any harsh abrasives or cleaning pads on Top Vent or
any part of the unit.
Cleaning the Odor Sensor Opening
The Odor Sensor is located on the side corner of the
OxyPure toward the top, under the small grill opening.
Keep Odor Sensor clear of dust and debris using a
soft cloth to maintain accurate odor readings.
DO NOT tamper with Odor Sensor or opening over
Sensor. Do not spray inside or near small grill opening
over the Odor Sensor. Doing so may cause the Sensor
to malfunction and can void your warranty.
DO NOT drop any dust or residue into the OxyPure
when cleaning.
18
Owner's Manual
CARE & MAINTENANCE
CAUTION
Odor Sensor

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido