Attaching Spray Gun - Ford FPWG36TA-J Manual Del Operador

Replace Shipping Plug with Dipstick (See fig 5)
• Replace the red shipping plug with the supplied yellow dipstick.
FIG 5
Attaching the Spray Gun (See fig 6 - 7)
• Screw the spray wand and the trigger handle together until they are secure.
• Attach high pressure hose to the gun, pull back the quick-connect collar of hose and insert the spray gun nipple into
the hose quick connector and then release the QC collar. Once the high pressure hose is connected, pull on the hose
to make sure the hose is firmly attached.
FIG 6
ASSEMBLY
12
FIG 7