Additional Features - Black+Decker PRO Serie Manual De Uso Y Cuidado

5. To iron without steam (dry iron), it is not necessary to empty the
water tank. Simply slide the Variable Steam Selector all the way to
the top (farthest back) position.
6. When finished ironing, turn the Steam Selector to the Off/Dry
Iron setting and set the Temperature Control Dial to the minimum
temperature setting. Unplug from the outlet.
7. Stand the iron on its heel rest and allow it to completely cool off
before storing.
SETTING GUIDE
For best results follow manufacturer's garment care tags for
recommended heat and steam setting instructions.
Setting number Setting name
- -
1 Synthetic
2 Nylon and Silk
3 Polyester
4 Blend
5 Wool
6 Cotton and Linen

ADDITIONAL FEATURES

Burst of Steam
Generate extra steam momentarily by pressing the Burst of Steam button.
Use on fabrics suitable for steaming in either the vertical
or horizontal position. For best performance, allow several seconds
between bursts.
Spray Mist
Press the Spray Mist button to generate a light spray of water.
Spray Mist is used to dampen tough wrinkles while dry or steam ironing.
Do not spray silk.
6
Setting Icons
Description
Do not Iron
Low Heat and
No Steam
or
Low Heat and
No Steam
or
Medium Heat
and No Steam
or
Medium Heat
and Light Steam
High Heat and
Medium Steam
High Heat and
High Steam
3-way Auto Shut-Off
The iron will automatically switch to Auto Shut-Off mode and stop heating
after being left inactive for 30 seconds on the soleplate or side, and 8
minutes on the heel rest. When the iron is in Auto Shut-Off mode, the red
light on the handle will blink. Simply move the iron to resume ironing and
the soleplate will automatically heat to selected temperature.
Vertical Steaming
Iron can be used without an ironing board as a garment steamer by holding
with soleplate in a vertical position. Remove wrinkles from curtains, drapes,
and use for small touch-ups on fabrics suitable for steaming.
1. Follow instructions 1-4 in "Using Your Iron" on page 5.
2. Hang garment on a hanger in a location that would not be impacted
by the steam, such as a bathroom shower rod.
3. With one hand, hold the garment tight from the base or side, being
careful to keep hands away from the steam. Hold preheated iron in
other hand.
4. Place soleplate about an inch away from the fabric and press the
Burst of Steam button. Allow a few seconds between burst to avoid
water dripping.
Tip: If water dripping occurs, the iron isn't hot enough to create steam.
Simply allow the iron a minute to reheat and then resume steaming.
5. When finished steaming, turn the Steam Selector to the Off/
Dry Iron setting and set the temperature control dial to the
minimum temperature setting. Unplug from the outlet.
6. Stand iron on its heel rest and allow to completely cool
before storing.
CL EA N I N G A ND C AR E
This product contains no user serviceable parts. Refer to qualified service
personnel.
AUTO-CLEAN ™ SYSTEM
• Use this feature to keep the iron free from build-up. For optimal results over
time, it is recommended that you clean your iron every 2-4 weeks. Homes
with harder water should clean their iron more often, every 1-2 weeks.
1. Fill the water tank well below the MAX fill line. Plug in the iron
2. Select the Wool fabric setting (number 5) on the temperature
control dial and stand the iron on its heel while it preheats.
3. Allow the iron to heat to desired temperature for about 2 minutes,
then turn the dial to the MIN setting and unplug from the outlet.
4. Hold iron over a sink with soleplate facing down. Press the Auto-
Clean™ button. Be careful, as hot water and steam will come out of
the vents.
7