Joneca Ready H2OT Guía De Instalación Y Operación página 10

continued:
PROBLEM POSSIBLE CAUSE
• Due to high temperature and for
Water does not
safety reasons, the tank is not
flow right away or
under pressure causing a slight
at all:
delay in water flow.
Water boils or
• The thermostat may be set too
vapor appears:
high.
Hot water drips or
• The thermostat may be set too
sputters from
high.
faucet:
4332 E. La Palma Avenue Anaheim, California 92807 Telephone: 714.993.5997 Fax: 714.993.2126
WHAT TO DO
• Make sure all valves on water supply are open.
• Check hose from faucet for twisting or tight bending.
• Check if quick-connect filter screen or faucet filter screen is
• Lower temperature setting by turning thermostat control dial
• Turn thermostat control dial counterclockwise.
• Check that the hose connecting the faucet to the dispenser
• If quick-connect fitting is connecting cold water supply,
• Check for proper installation of tubing from faucet to
Joneca Corporation
Website: www.Joneca.com E-Mail: ConsumerService@Joneca.com
Call Our Toll Free Help Line
888.8JONECA
clogged (see faucet manual).
counterclockwise.
tank is not clogged, twisted or kinked.
check for a clogged filter screen in quick-connect fitting (see
CLEANING AND MAINTENANCE of faucet manual).
dispenser tank and faucet to water line. If connected
backwards or cross-connected, valve may be damaged.
(10)