Getting Started; Charging The Battery - Vektro EV90 Manual De Usuario

GETTING STARTED

Charging The Battery

IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before using
it for the first time.
WARNING!
 Use only the original external adaptor and charging plug provided.
 Make sure the pool vacuum and the charging port are clean and dry before
set-up and charging. (TIPS : use a cotton bud to dry the charging port and
charging pins)
 The charging pins are waterproof. However, remnants of water in the port
and around the pins could result in natural occurrence of stains (a
byproduct of chemical reaction between water and electric currents).
Otherwise, the stains can be removed by light scrubbing with a cotton bud
soaked with juice of lemon or vinegar.
1. Place the unit on a flat surface. Set the pool vacuum to Power Off/
Charging Mode by turning the switching knob anticlockwise until it clicks
and completely exposes the charging port.
2. Align and attach the charging plug to the charging port. WARNING! Be
sure not to invert the charging plug and ensure both the charging plug and
charging port are clean and dry before charging them. TIPS: Use cotton
bud to dry the chaging port and pins. Plug the charging cable of the
external adaptor into the charging plug.
11