DoorBird D20 Serie Manual De Instrucciones página 6

Videoportero ip
Ocultar thumbs Ver también para D20 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

the safety screws and the appropriate tool. Applies only to DoorBird Video
Door Station D203 and D204: Mount the Video Door Station with appro-
priate screws/dowels on the wall/fence. D205: Depends on the environment /
integration. If necessary, call a professional for help.
STEP 11: ACTIVATING THE VIDEO DOOR STATION
Switch on the power to the wires leading to the assembly location again.
You can see whether you have connected the power supply properly from the
Diagnostic LED (it lights up once the power has been connected correctly
for up to five minutes and continuously in night-vision mode). The video door
station is ready for operation (booting up process, any software updates, etc.)
once it has emitted a short diagnosis sound from the integrated loudspeaker.
This may last for up to 5 minutes. Should you not hear a beep, please check
the power supply. Please also check whether you have used a wall-plug
power-supply and not PoE and whether you have connected the positive
pole and negative pole to the video door station correctly.
STEP 12: DOWNLOADING AND INSTALLING THE APP
Download the „DoorBird" app by Bird Home Automation onto your mobile
device from the Apple app store or Google Play store. You can always find the
most up-to-date version of the App manual on www.doorbird.com/support
If you use WiFi for connecting the video door station to your Internet router,
first go to „Settings > WiFi Setup" and follow the instructions.
If you have finished the WiFi set-up or have connected the video door station
to your Internet router by means of a network cable, go to „Settings > Add
device" and click on the QR code icon in the „User" field. Scan the user QR
code found on the „Digital Passport" that accompanies the video door station.
If you have problems adding the video door station to the App please check
if the video door station is online ( www.doorbird.com/checkonline ). If the
video door station is not online, please check the WiFi or network cable
connection again.
Since Apple uses very high quality microphones, loudspeakers and digital audio
components that are perfectly in tune with one another, the voice quality with
an iPhone or iPad is usually noticeably better than with an Android smartphone
or Android tablet.
10
DIAGNOSTIC-LED
This LED light is only lit up for five minutes after the Video Door Station has
been supplied with power (and continuously at night). It lights up as soon as
the Video Door Station is supplied with power.
∙ Illuminated: Device is powered
DIAGNOSTIC-SOUNDS
After around two to five minutes, the video door station emits brief diagno-
stic sounds after it has been connected to the power grid.
∙ 1x diagnostic sound: The video door station is connected to the Internet
∙ 2x diagnostic sounds: The video door station is able to communicate with
the router, but cannot access the Internet
∙ 3x diagnostic sounds: The video door station has no connection to the network
CHANGING THE LABELING ON THE NAME PLATE
P. Martin
Insert the straight end of the metal plate supplied into the slot at the side.
Pulling on the metal plate will remove the name plate which can then
be labeled.
P. Martin
P. Martin
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

D201D202D203D204D205

Tabla de contenido