Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Front Panel
1
3
5
2
4
Power Button/LED (1)
Power (and LED) will be ON when switch is pushed in.
Input Level Control (2)
This knob attenuates or boosts the incoming signals (left and right). Set this so that the Signal/Clip
LED turns red only on extreme peaks (or not at all).
Signal/Clip LED (3)
This will illuminated green when either of the input signals reaches 18 dB under clipping. It will switch
to red when the level reaches 3 dB under clipping.
Output Level Control (4)
This knob controls the volume of the Left and Right outputs.
Store Button (5)
Press this to enter Preset Store mode, which allows you to store the current effect settings. A
destination (00.-99.) can be selected, and a second "press" will store the data. (Pressing one of the
other buttons instead of a second press of Store will exit Store mode.)
Mode Button/LEDs (6)
Pressing the Mode button will scroll through the top three LEDs (Preset mode, Edit A mode, Edit B
mode). Holding for one second will enter Defeat mode, after which a simple press will exit Defeat
mode.
Numerical Display/Data Wheel (7)
This is the main editing tool. The wheel allows editing of the parameter that is currently displayed,
indicated by the discrete LEDs.
8
Preset
Edit A
Edit B
Defeat
6
7
9
8
Publicidad
Tabla de contenido
