DAB FUNCTIONS
Press the MODE button repeatedly to switch to DAB mode.
On first use it will automatically scan all stations and save them.
Note: Fully extend the antenna.
Scan
•
To auto scan, press the SCAN button and then release.
•
This will start scanning up the frequency band and store all stations
that have a good signal.
•
If can't scan any station, press and hold the MANU button to select
FULL SCAN, then press ENTER button to start scanning.
•
The radio will automatically save all the stations with a strong sig-
nal, up to 240 MHz. After searching has finished it will automatically
play the first station stored.
•
To listen to all stations that have been stored use the Prev and Next
button to scroll through them. Press the ENTER button when on the
required station.
•
The radio will display station information when you press the INFO/
MENU button. Press multiple times to view all information available.
•
When you turn on the radio again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
Note: In DAB mode, the radio will synchronize with the time and date
of the station.
20